GAS DETECTORS
E2658 Series – E2658-C2H4
– Technical DatasheetE2658-C2H4
Flameproof Ethylene Detector-Transmitter
- Suitable for ATEX Zones 2 and 22
- Humidity compensated electrochemical sensor
- Range 0…10 / 0…200 / 0…1500 ppm C2H4
- Resolution 0,1 / 1 / 5 ppm C2H4
- Two SPST relays option
- 2 × 4-20 mA or 0-
Product Description:
E2658 series is a new line of flameproof detectors and transmitters intended for use in ATEX Zones 2 and 22.
E2658 series devices are based on PluraSens® multifunctional platform.
Ethylene detector-transmitter E2658-C2H4utilises a fully calibrated and temperature compensated electrochemical gas sensor with excellent repeatability, stability and long lifetime. Due to a special technical solution for humidity compensation (available as an option), the detector may be used even at humidity levels up to 100% RH.
Two relays with closing contact (optional) may be used for remote signalling or concentration control. Two alarm set-points are user settable.
Two analog outputs and RS485 digital interface with industry standard Modbus RTU protocol can be used to connect the detector to safety or building automation systems.
E2658-C2H4
Flameproof Ethylene Detector-Transmitter
- Suitable for ATEX Zones 2 and 22
- Humidity compensated electrochemical sensor
- Range 0…10 / 0…200 / 0…1500 ppm C2H4
- Resolution 0,1 / 1 / 5 ppm C2H4
- Two SPST relays option
- 2 × 4-20 mA or 0-
Product Description:
E2658 series is a new line of flameproof detectors and transmitters intended for use in ATEX Zones 2 and 22.
E2658 series devices are based on PluraSens® multifunctional platform.
Ethylene detector-transmitter E2658-C2H4utilises a fully calibrated and temperature compensated electrochemical gas sensor with excellent repeatability, stability and long lifetime. Due to a special technical solution for humidity compensation (available as an option), the detector may be used even at humidity levels up to 100% RH.
Two relays with closing contact (optional) may be used for remote signalling or concentration control. Two alarm set-points are user settable.
Two analog outputs and RS485 digital interface with industry standard Modbus RTU protocol can be used to connect the detector to safety or building automation systems.
