063 527 9870 info@ganargroup.co.za

GAS DETECTORS

E2658 Series – E2658-O2

 

E2658-O2

Flameproof Oxygen Detector-Transmitter

  • Suitable for ATEX Zones 2 and 22
  • Electochemical or optical sensor
  • Range 0…25 %vol O2
  • Resolution 0,01 %vol O2
  • Two SPST relays option
  • 2 × 4-20 mA or 0-10 V, RS485

Product Description:

E2658 series is a new line of flameproof transmitters intended for use in ATEX Zones 2 and 22. 

E2658 series devices are based on PluraSens® multifunctional platform.

Oxygen detector-transmitter E2658-O2 may be used to prevent critical decrease of O2 concentration as well as to control the absence of the oxygen in gas mixtures.

The instrument utilises a fully calibrated and temperature compensated gas sensor with excellent repeatability, stability and long lifetime. 

Two relays with closing contact (optional) may be used for remote signalling or concentration control. Two alarm set-points are user settable.

Two analog outputs and RS485 digital interface with industry standard Modbus RTU protocol can be used to connect the detector to safety or building automation systems.

E2658-O2

Flameproof Oxygen Detector-Transmitter

  • Suitable for ATEX Zones 2 and 22
  • Electochemical or optical sensor
  • Range 0…25 %vol O2
  • Resolution 0,01 %vol O2
  • Two SPST relays option
  • 2 × 4-20 mA or 0-10 V, RS485

Product Description:

E2658 series is a new line of flameproof transmitters intended for use in ATEX Zones 2 and 22. 

E2658 series devices are based on PluraSens® multifunctional platform.

Oxygen detector-transmitter E2658-O2 may be used to prevent critical decrease of O2 concentration as well as to control the absence of the oxygen in gas mixtures.

The instrument utilises a fully calibrated and temperature compensated gas sensor with excellent repeatability, stability and long lifetime. 

Two relays with closing contact (optional) may be used for remote signalling or concentration control. Two alarm set-points are user settable.

Two analog outputs and RS485 digital interface with industry standard Modbus RTU protocol can be used to connect the detector to safety or building automation systems.