GAS DETECTORS
E2658 Series – E2658-PID
– Technical DatasheetE2658-PID
Flameproof Solvent Vapors Detector-Transmitter
- Suitable for ATEX Zones 2 and 22
- Highly sensitive Photo Ionization Detector
- Range 0…40 or 0…200 ppm isobutylene
- Resolution 1 ppb or 1 ppm isobutylene
- Two SPST relays option
- 2 × 4-20 mA or 0-10 V, RS485
Product Description:
E2658 series is a new line of flameproof transmitters intended for use in ATEX Zones 2 and 22.
E2658 series devices are based on PluraSens® multifunctional platform.
Solvent vapors transmitter E2658-PID utilises highly sensitive photoionization detectors (PID) with extremely low minimal detection levels. The transmitter exhibits sensitivity to compounds with ionization potential less than 10.6 eV, i.e. to most solvent vapors.
Two relays with closing contact (optional) may be used for remote signalling or concentration control. Two alarm set-points are user settable.
Two analog outputs and RS485 digital interface with industry standard Modbus RTU protocol can be used to connect the detector to safety or building automation systems.
E2658-PID
Ethylene Detector-Transmitter
- Humidity compensated electrochemical sensor
- Range 0…10 / 0…200 / 0…1500 ppm C2H4
- Resolution 0,1 / 1 / 5 ppm C2H4
- Two SPST relays
- 2 × 4-20 mA or 0-10 V, RS485
Product Description:
Ethylene detector-transmitter E2608-C2H4 is a member of new PluraSens® family of multifunctional measurement instruments.
Applications include fruit ripening and storage rooms, chemical and polymer industry and other areas requiring precise measurement of ethylene concentration.
The instrument utilises a fully calibrated and temperature compensated electrochemical gas sensor with excellent repeatability, stability and long lifetime. Due to a special technical solution for humidity compensation (available as an option), the detector may be used even at humidity levels up to 100% RH.
Two relays with closing contact may be used for remote signalling or concentration control. Two alarm set-points are user settable.
Two analog outputs and RS485 digital interface with industry standard Modbus RTU protocol can be used to connect the detector to safety or building automation systems.
