Level Transmitters
Gañar Automation brand today is a diverse range of application-oriented devices – sensor assemblies, transmitters with analog and digital outputs, data-loggers, industrial panel meters and controllers – for measurement or control of main process and environment variables; such as:
Temperature | Pressure | Level | Humidity | Toxic and explosive gases
Level Transmitters
E2703
Fuel Level Sensor with RS232 Interface
- Accurate, reliable design
- Easy installation
- Stem cuttable to length
- EIA232 serial interface
- Omnicomm protocol
Product Description:
Digital sensors with serial interfaces
Evikon E2700 family of level transmitters with digital interfaces is specially designed for precision fuel level measurement in vehicle and stationary tanks. Applications include vehicle tracking, AVL and fleet management systems. Highly sensitive capacitive technology, robust construction and full digital signal processing ensure stable, accurate and reliable measurements.
High accuracy and linearity
The resolution is better than 0.1% of the range, typically 0.07 mm. Thus high accuracy is provided even in low profile tanks. Thanks to two adjustable digital integrating filters short term fuel level fluctuations do not affect the sensor output. The internal 32-point calibration system enables highly linear output in user defined volume units.
Stable construction
E2700 series transmitters are carefully engineered for best performance and reliability. The sensor stem is made of special light metal alloy for corrosion resistance and stiffness. The vertical slot in the stem reduces its clogging by residues in the fuel, facilitates cleaning and maintenance and improves the reaction time compared to closed tube geometry. The electronics box is completely sealed, providing protection from mechanical and corrosive impact.
Adjustable stem length
The stem can be easily cut directly at the installation place up to 20% of initial length to fit into the tank. Two standard lengths that suit the majority of fuel tanks are L800 mm, which may be cut to 100 mm and L1600 mm, which may be cut to 200 mm. The maximum stem length is limited to L2400 mm.
– Technical Datasheet
E2704
Fuel Level Sensor with RS485 Interface
- Accurate, reliable design
- Easy installation
- Stem cuttable to length
- EIA485 serial interface
- Modbus ASCII or Omnicomm protocol
Product Description:
Digital sensors with serial interfaces
Evikon E2700 family of level transmitters with digital interfaces is specially designed for precision fuel level measurement in vehicle and stationary tanks. Applications include vehicle tracking, AVL and fleet management systems. Highly sensitive capacitive technology, robust construction and full digital signal processing ensure stable, accurate and reliable measurements.
High accuracy and linearity
The resolution is better than 0.1% of the range, typically 0.07 mm. Thus high accuracy is provided even in low profile tanks. Thanks to two adjustable digital integrating filters short term fuel level fluctuations do not affect the sensor output. The internal 32-point calibration system enables highly linear output in user defined volume units.
Stable construction
E2700 series transmitters are carefully engineered for best performance and reliability. The sensor stem is made of special light metal alloy for corrosion resistance and stiffness. The vertical slot in the stem reduces its clogging by residues in the fuel, facilitates cleaning and maintenance and improves the reaction time compared to closed tube geometry. The electronics box is completely sealed, providing protection from mechanical and corrosive impact.
Adjustable stem length
The stem can be easily cut directly at the installation place up to 20% of initial length to fit into the tank. Two standard lengths that suit the majority of fuel tanks are L800 mm, which may be cut to 100 mm and L1600 mm, which may be cut to 100 mm. The maximum stem length is limited to L2400 mm.
E2706
Fuel Level Sensor with CAN and 0-10 V
- Accurate, reliable design
- Easy installation
- Stem cuttable to length
- CAN interface, J1939 protocol
- 0-10 V analog output
Product Description:
E2706 with CAN interface and 0…10 V analog output is the latest addition to the Evikon E2700 family of digital level transmitters, designed for precision fuel level measurement in vehicle and stationary tanks. Applications include vehicle tracking, AVL and fleet management systems. Highly sensitive capacitive technology, robust construction and full digital signal processing ensure stable, accurate and reliable measurements.
The resolution is better than 0.1% of the range, typically 0.07 mm. Thus high accuracy is provided even in low profile tanks. Thanks to two adjustable digital integrating filters short term fuel level fluctuations do not affect the sensor output. The internal 32-point calibration system enables highly linear output in user defined volume units.
E2706 is carefully engineered for best performance and reliability. The sensor stem is made of special light metal alloy for corrosion resistance and stiffness. The vertical slot in the stem reduces its clogging by residues in the fuel, facilitates cleaning and maintenance and improves the reaction time compared to closed tube geometry. The electronics box is completely sealed, providing protection from mechanical and corrosive impact.
The stem can be easily cut directly at the installation place up to 20% of initial length to fit into the tank. Two standard lengths that suit majority of fuel tanks are available: L800 mm which may be cut to 100 mm and L1600 mm which may be cut to 100 mm. The maximum stem length is limited to L2400 mm.
E2713
Magnetic Float Level Switch
- Min, Max, Min+Max or up to 5 setpoints
- Full stainless steel construction
- NO, NC or changeover contacts
- M12 connector or cable output
- Water, oil or diesel level in tanks
Product Description:
Magnetic float level switch E2713 is intended for control of liquids level in tanks.
The instrument uses magnetic floats, moving along the stem, and reed switches, installed inside the stem at selected setpoints. Each reed switch is actuated when the float is positioned at the corresponding setpoint. The setpoint positions are specified at ordering and cannot be later adjusted by the user.
E2713 may be ordered in several versions, providing Min, Max, Min+Max or up to five level setpoints. Options with various stem length, as well as normally open (NO), normally closed (NC) or switch-over (SO) contacts, are available.
Thanks to wetted parts fully made of V2A grade stainless steel, the E2713 level switch may be used in various liquids including water, beverages, oils, fuel, and operates at fluid temperatures up to +130 °C.
E2703
Fuel Level Sensor with RS232 Interface
- Accurate, reliable design
- Easy installation
- Stem cuttable to length
- EIA232 serial interface
- Omnicomm protocol
Product Description:
Digital sensors with serial interfaces
Evikon E2700 family of level transmitters with digital interfaces is specially designed for precision fuel level measurement in vehicle and stationary tanks. Applications include vehicle tracking, AVL and fleet management systems. Highly sensitive capacitive technology, robust construction and full digital signal processing ensure stable, accurate and reliable measurements.
High accuracy and linearity
The resolution is better than 0.1% of the range, typically 0.07 mm. Thus high accuracy is provided even in low profile tanks. Thanks to two adjustable digital integrating filters short term fuel level fluctuations do not affect the sensor output. The internal 32-point calibration system enables highly linear output in user defined volume units.
Stable construction
E2700 series transmitters are carefully engineered for best performance and reliability. The sensor stem is made of special light metal alloy for corrosion resistance and stiffness. The vertical slot in the stem reduces its clogging by residues in the fuel, facilitates cleaning and maintenance and improves the reaction time compared to closed tube geometry. The electronics box is completely sealed, providing protection from mechanical and corrosive impact.
Adjustable stem length
The stem can be easily cut directly at the installation place up to 20% of initial length to fit into the tank. Two standard lengths that suit the majority of fuel tanks are L800 mm, which may be cut to 100 mm and L1600 mm, which may be cut to 200 mm. The maximum stem length is limited to L2400 mm.
E2704
Fuel Level Sensor with RS485 Interface
- Accurate, reliable design
- Easy installation
- Stem cuttable to length
- EIA485 serial interface
- Modbus ASCII or Omnicomm protocol
Product Description:
Digital sensors with serial interfaces
Evikon E2700 family of level transmitters with digital interfaces is specially designed for precision fuel level measurement in vehicle and stationary tanks. Applications include vehicle tracking, AVL and fleet management systems. Highly sensitive capacitive technology, robust construction and full digital signal processing ensure stable, accurate and reliable measurements.
High accuracy and linearity
The resolution is better than 0.1% of the range, typically 0.07 mm. Thus high accuracy is provided even in low profile tanks. Thanks to two adjustable digital integrating filters short term fuel level fluctuations do not affect the sensor output. The internal 32-point calibration system enables highly linear output in user defined volume units.
Stable construction
E2700 series transmitters are carefully engineered for best performance and reliability. The sensor stem is made of special light metal alloy for corrosion resistance and stiffness. The vertical slot in the stem reduces its clogging by residues in the fuel, facilitates cleaning and maintenance and improves the reaction time compared to closed tube geometry. The electronics box is completely sealed, providing protection from mechanical and corrosive impact.
Adjustable stem length
The stem can be easily cut directly at the installation place up to 20% of initial length to fit into the tank. Two standard lengths that suit the majority of fuel tanks are L800 mm, which may be cut to 100 mm and L1600 mm, which may be cut to 100 mm. The maximum stem length is limited to L2400 mm.
E2706
Fuel Level Sensor with CAN and 0-10 V
- Accurate, reliable design
- Easy installation
- Stem cuttable to length
- CAN interface, J1939 protocol
- 0-10 V analog output
Product Description:
E2706 with CAN interface and 0…10 V analog output is the latest addition to the Evikon E2700 family of digital level transmitters, designed for precision fuel level measurement in vehicle and stationary tanks. Applications include vehicle tracking, AVL and fleet management systems. Highly sensitive capacitive technology, robust construction and full digital signal processing ensure stable, accurate and reliable measurements.
The resolution is better than 0.1% of the range, typically 0.07 mm. Thus high accuracy is provided even in low profile tanks. Thanks to two adjustable digital integrating filters short term fuel level fluctuations do not affect the sensor output. The internal 32-point calibration system enables highly linear output in user defined volume units.
E2706 is carefully engineered for best performance and reliability. The sensor stem is made of special light metal alloy for corrosion resistance and stiffness. The vertical slot in the stem reduces its clogging by residues in the fuel, facilitates cleaning and maintenance and improves the reaction time compared to closed tube geometry. The electronics box is completely sealed, providing protection from mechanical and corrosive impact.
The stem can be easily cut directly at the installation place up to 20% of initial length to fit into the tank. Two standard lengths that suit majority of fuel tanks are available: L800 mm which may be cut to 100 mm and L1600 mm which may be cut to 100 mm. The maximum stem length is limited to L2400 mm.
E2713
Magnetic Float Level Switch
- Min, Max, Min+Max or up to 5 setpoints
- Full stainless steel construction
- NO, NC or changeover contacts
- M12 connector or cable output
- Water, oil or diesel level in tanks
Product Description:
Magnetic float level switch E2713 is intended for control of liquids level in tanks.
The instrument uses magnetic floats, moving along the stem, and reed switches, installed inside the stem at selected setpoints. Each reed switch is actuated when the float is positioned at the corresponding setpoint. The setpoint positions are specified at ordering and cannot be later adjusted by the user.
E2713 may be ordered in several versions, providing Min, Max, Min+Max or up to five level setpoints. Options with various stem length, as well as normally open (NO), normally closed (NC) or switch-over (SO) contacts, are available.
Thanks to wetted parts fully made of V2A grade stainless steel, the E2713 level switch may be used in various liquids including water, beverages, oils, fuel, and operates at fluid temperatures up to +130 °C.
